August 10, 2014

How to Improve the Efficiency of Circular Vibrating Screen?

Circular vibrating screen is the most used screening machine, the benefit of enterprises will be increased if Improve screening efficiency,but its working efficiency not depend on the materials quantity,if you put the materials is too big, the sieve hole will be blocking,the sieve hole is easy to damage,this will be counterproductive. we should be strict control the screen component, screening material depends on how much material characteristics and screen material. Material of high moisture content or viscous larger easy to produce condensation reduce efficiency of screening, the material and sieve if do vertical motion, it can be increase the speed of the sieve material to improve working efficiency. Sieve the effective area of screening of large amount of material, improve the working efficiency.

Power motor of vibrating is also decided to screening efficiency factors,should be choose the working frequency and exciting force are biggest power,speed to close to the operating frequency,the biggest shock force must be in the chosen of motor synthesis vibration force range,according to the selection work frequency and big vibration force choose vibration motor power; Material movement speed also on efficiency plays an important factor, athletes meeting cause screening not thoroughly, in the screen before the determination of the best material movement speed, and according to different material choose a different screen, in order to improve equipment processing capacity.

Our effective rock crusher could be applied to series of construction companies. For instance, the cement factories and building companies would need to use it to accomplish completed tasks. It enable the customers to earn more profits since the energy consumption is reduced. During the researching and manufacturing, Fote Machinery believe that we should connect our designs with the market demand.

coal ball press machine: http://www.futemac.com/briquette_machine/coal-briquetting-machine.html

Filed under Uncategorized by oppo

Permalink Print

Copper Mining Copper Mining Crusher Greater Demand

South Africa has 1,113 mines and quarries in 55 minerals, including 45 stone mines, 29 PGM mines, 64 mines, 202 diamond.Reserve base in South Africa for 13 million tons of copper. Copper reserves are mainly located in the Palabora complex body, Moxi Na, Aoji Pu, Prairie ska, Ajinnisi and Bush Vail plutons, recycling copper mining and secondary copper slag are required to meet the new crushing machine.

With the enconomic greatly development, the copper mine mining industry has larger demand of copper mining crusher, beneficiation crusher, Fote designed the copper primary jaw crusher, copper impact crusher pf1214, copper hydraulic cone crusher hpc220. Copper mine bivitec screen and crusher advanced features: 1. Reliability performance; 2.Increased Capacity 100T-1000T; 3. Reduced invest Costs; 4. Easy installation cost; 5.Reliability, maintenance and wear. Many copper mining and copper slay recycling process business want to invest in South Africa, and they also looking for best agnents for Copper mine bivitec screen and crusher. Now I will give you a best overview of the largest agent in South Africa.

FOTE as one of the largest supplier and company of Copper mine bivitec screen and crusher, every year, we export many Copper mine bivitec screen and crusher for south africa copper mining market, our Copper mine bivitec screen and crusher including the 100tph copper beneficiation machines, 300tph copper hydraulic cone crusher, 400tph capacity hydraulic cone crusher, mobile crushing and screen machines andning market location. Our effective rock crusher could be applied to series of construction companies. For instance, the cement factories and building companies would need to use it to accomplish completed tasks. It enable the customers to earn more profits since the energy consumption is reduced. During the researching and manufacturing, Fote Machinery believe that we should connect our designs with the market demand.

Fote Brand is the China Famous Brand, and Fote believes that reliable and stable quality is the key to success. Our products like scrap metal crusher, automatic dry mortar mixed production line are well known at home and abroad. Welcome to visit for cooperation, thank you!fluorite powder briquetting machine: http://www.ft-mac.com/pro/Ore_powder_ball_press_machine.html

Filed under Uncategorized by oppo

Permalink Print

August 8, 2014

Ways of Improving the Production and Quality of Ball Mill

Do you know how to improve the production and quality of ball mill? Ball mill is a important machine in mining machinery industry and mainly used in building, mining, road and chemical industry, etc. How to improve the production and quality of ball mill is a very important thing for ball mill is so widly used. Generally speaking, there are three kinds of direct way to improve the production of ball mill: 1. Add fine crusher before grinding machine; 2. Improved grinding system, improve the efficiency of grinding; 3. Add efficient classifier.

If you use any of these three methods, the production of ball mill will greatly improved. Of course, the effect is better if the methods used simultaneously. Of these three methods, finely of grinding is the precondition, Choose powder after-grinding is the guarantee and reform of the grinding is basic.

The size of material particle is reduced greatly by use the first methods, which will reduces the load of grinding system. The most direct benefit is the finished product fine powder is timely elected by the improve efficiency of choose powder, reduce the back to powder rate of cement products, also will reduce mill load. And the improvement of grinding system is the most fundamental solution.

Our effective rock crusher could be applied to series of construction companies. For instance, the cement factories and building companies would need to use it to accomplish completed tasks. It enable the customers to earn more profits since the energy consumption is reduced. During the researching and manufacturing, Fote Machinery believe that we should connect our designs with the market demand.

silver ore beneficiation plant: http://www.ftm-ore-beneficiation.com/pro/silver_ore_beneficiation_plant.html

Filed under Uncategorized by oppo

Permalink Print

Design of Arenaceous Quartz Production Line

The formation of sand stone production line,crushing production line or beneficiation production line need to add in the most front-end feeder, feeder played what role in the production line? First, according to the name of the feeder understanding to the entire production line to transport the material to be broken, and a storage and transportation device. Some manufacturers in order to save expenses omitted machine used hopper to the filling, which in some cases is also possible, but not feasible in most cases, because the feeder design principle is that the material is uniformly conveyed to crushing equipment, crusher throughput, reasonable and effective adjustments, uniform and continuous or quantitatively to by the feeding device, to ensure the efficiency and lifetime of the device of the subject material by way of vibration to prevent equipment due to the speed of filling over fast and stuck.

Such as use vertical compound crusher, vertical compound crusher internal rotor driven hammer to be crushed under the material used in mining, stone and other industries need to be broken to a certain granularity and its moisture content is not easy, can be used in the case of a heavy hammer, its speed can increase the need to use a thin-hammer, but the materials for the building materials industry is a higher water content and not easy cutting, reduce speed to prevent the device stuck.

Overall, the device needs to be replaced within the configuration carried out to determine the water content of the material is based on customers, such as higher water content greater viscosity of the material is not easy nesting need to reduce the speed of the equipment, the replacement of the lower resistance hammer in order to ensure the normal operation of equipment production and does not affect the crushing effect.

The leading products of Fote Machinery includedouble-drum dryer, coal slime dryer price, jaw crushing machine and so on. Moreover, we can provide program design, process flow design, standard and non-standard design for clients.quick lime dry powder briquetting machine: http://www.fote-machine.com/product/quick-lime-dry-powder-ball.html

Filed under Uncategorized by oppo

Permalink Print

Introduction to Application of Fote Hammer Crusher

Hammer crusher for crushing various mid-hard and abrasive materials weak. The compressive strength of the material does not exceed 100MPa, moisture content of less than 15%. Material to be broken coal, salt, chalk, plaster, brick, limestone and so on. Also for broken fiber structure, flexibility and toughness strong pieces of wood, paper, or broken asbestos cement waste to recycling asbestos fiber, and so on.

Upper and lower case by the crusher body, broken plates, sieve, pallets, back plate, lining and other major parts. Broken plates and sieve mounted on the pallet. Pallet supported on one end with the axis of the shaft seat on the chassis side, the other end is connected through the connecting plate and the adjusting mechanism. Liner installed in the chassis on both sides of the wall to protect the casing from wear and tear. Broken plates, plate, back plate and the rotor form a crushing chamber.

Regulatory agencies by the worm, worm wheel, pointer, clearance signs and other major parts, used to adjust and show the gap between the rotor and sieve. Hammer crusher is rotors with hammer impact crusher, hammer not only with the rotor rotation, but also around the hammer pin rotation. Materials into the crusher, in the crushing chamber by high-speed rotation of the rotor ring with the impact hammer and broken, was broken material obtained from both the hammer kinetic energy, high-speed toward the broken plates, broken by the second, then fell on the sieve, by the hammer of the shear, extrusion, grinding and the materials and the material between the collision, the material can be further broken, and through the mesh from the plane. Debris can not be broken by the hammer to push the metal collector who, by the operator to periodically clear.

The leading products of Fote Machinery includehigh alumina ball, hammer breaker, jaw crushing machine and so on. Moreover, we can provide program design, process flow design, standard and non-standard design for clients.coke powder briquette machine: http://www.futemac.com/briquette_machine/strong-pressure-ball-machine.html

Filed under Uncategorized by oppo

Permalink Print

System Uses the Highest Quality for Belt Conveyor Products

Belt conveyors systems uses only thehighest quality premium belting products, which reduces belt stretch and results in less maintenance for tension adjustments. Belt conveyors can be used to transport product in a straight line or through changes in elevation or direction. In certain applications they can also be used for static accumulation or cartons. Generally, this philosophy calls for belt cleaners that are: As far forward (as close to the conveyor discharge) as possible. Positioned out of the material flow. Designed to minimize risk to belt, splice, and cleaner itself. Designed to stand up to “worst case” conditions. Designed for ease of maintenance, including simple blade replacement and reduced frequency of re-tensioning, Belt conveyors are available with either rollers (roller belt) or a solid surface (slider bed) to support the carrying belt.

In vibrating feeder’s operation, there should be always materials usually not less than 300 mm on the scraping belt. It is prohibited to place materials on the scraping belt in the emptying condition. When unloading is unavoidable, a layer of crushed aggregates should be paved on the scraping belt to protect it from being impacted directly. When the opening blocked by over-size material, it is prohibited to discharge it by blasting. The operator should be familiar with the machine’s structure theory. Before operating, the person should check whether all the parts are in a normal condition and the connection bolts on scraping belt become flexible. If everything has been OK, the machine can start to work. All the bearings and reducer should be lubricated correctly. The regular exchange of oil should be 300 hevery time except 3000h for the first time. Pay attention to the working condition of scraping belt, especially checking whether there is any loosening in connection bolts. The chain should be kept fitting in loose and tight. If it is off tracking, the tension device should be used to make adjustment. If any abnormal sound or breakdown takes place in the operation, the machine should be stopped immediately. Find out the problem carefully and solve it.

The leading products of Fote Machinery includeorganic fertilizer making machine, single stage hammer crusher, jaw crushing machine and so on. Moreover, we can provide program design, process flow design, standard and non-standard design for clients.metal powder ball press machine: http://www.futemac.com/briquette_machine/strong-pressure-ball-machine.html

Filed under Uncategorized by oppo

Permalink Print

Application of Fote Feeder

Feeder and crusher together as ancillary equipment, which itself does not have the crushing, screening and other functions, there are many kinds of feeder: Trough feeder, disc feeder, vibrating feeder several categories, common trough feeder and vibrating feeder two categories. Vibrating feeder it is currently the most widely used devices are widely used in mining, metallurgy, coal, building materials, light industry, chemical industry, electricity, machinery, food industry, massive, granular and powder out of the silo or hopper uniform continuous or quantitative. Given by the feeding device, such as belt conveyors, crushers and other equipment to achieve the automation of the production process.

Many customers have been asking when the purchase of production line can not fail to use feeder, we give the answer is yes, do not use the crusher there are many, two of which First: customer use of human fillers, by artificial judgment quantitative filled, but the drawback is time-consuming but also likely to cause the the unstable production efficiency and crusher easy to choke on a lot of filler; take advantage of the terrain, the construction of silos so that the material itself slipped to be crushed in the crusher broken positions, this can be done Province go to a feeder as well as eliminating the need for large the amount of manpower, but the amount of feed is not easy to control, and is likely to cause unnecessary trouble, so we recommend to use in the broken line feeder.

Our effective rock crusher could be applied to series of construction companies. For instance, the cement factories and building companies would need to use it to accomplish completed tasks. It enable the customers to earn more profits since the energy consumption is reduced. During the researching and manufacturing, Fote Machinery believe that we should connect our designs with the market demand.

Fote Machinery lays much emphasis on the machine quality and service for clients. We provides cylinder dryer, active lime line with good quality, and we believe that quality is the best way to develop market. Thank you!sludge drying machine: http://www.china-ftm.com/pros/coal_slime_dryer.html

Filed under Uncategorized by oppo

Permalink Print

August 6, 2014

Nepal Mini Calcite Factory Price

Do you know Nepal mini calcite factory price? After decades of development , China crusher industry gradually grow and mature . And is accompanied by the infrastructure boom , the rapid development of the industrialization process, the western region development project , open the market door of the crusher industry , the outlook can be very broad . Big but not strong crusher industry in the process towards international road , facing the obstacles to technological innovation and brand building . At present, China crusher manufacturers are mostly small and medium-sized enterprises and the pattern of white-hot competition to some extent, disrupted the market , but also hindered the pace of the industry out of Crusher country . Good and bad product quality is also a lot of inconvenience for customer choice .

Constantly upgrading our mining equipment business technology will bring an endless stream of new products on the market , so there will not be the absolute market saturation of our domestic enterprises need to do is familiar with the foreign mode of operation , increase investment in technology research and development , the formation of fixed brand image and advantages , the only way to continuously improve the technology value-added products , to form foreign equipment targeted competitive advantage by virtue of the domestic labor , low cost products , but also has a strong price advantage .So 2012 crushers, shredders, crushers and other mining machinery exports to continue selling , and opportunities for challenges , how to take advantage of such opportunities and challenges to achieve improvement and change , or will become the hot topic of the export sector .

Fote Machinery lays much emphasis on the machine quality and service for clients. We provides rotary kiln burner, whole grinding plant with good quality, and we believe that quality is the best way to develop market. Thank you!cassava dregs drying machine manufacturer: http://www.ft-dryer.com/products/cassava-dregs-dryer.html

Filed under Uncategorized by oppo

Permalink Print

Micro-grinding Mill Mineral Process Industry Is Key

Ash content often should be controlled to adapt to some recommended excellent stipulated in contractual agreements. Because of firing traits, it is actually typically as important to retain the ash content material at a given degree since it is to lower it. Recent improvement includes the MTW collection mill, vertical mill, impact crusher,Track mounted crusher,JCE sequence jaw crusher, etc. Deeply believe the measure of our worth is inside the development and innovation of latest products, and we’re pursuing the ‘Fote path of technology and quality’ all of the way. We maintain ‘Pursuing theFoteTechnologies and Quality’ as our management idea all the time. Relying on absorbing world top crushing and powder processing technologies, sophisticated management and high-quality handle system, too as our complete attempts have made our firm earn higher reputation amongst our clients.

Carton Sheet Output Machine is new solution made by our firm after absorbing the sophisticated technologies household and overseas. This sort of crusher can crush a lot of sorts of supplies with max feed size less than 500mm and crushing strength much less than 360 MP. It’s the capabilities of high ratio of crushing, high effectiveness of crushing, simple to upkeep, and so forth. The ultimate goods are with cubic designs and would be the ideal equipments for construction the freeway and h2o and electricity building. Moreover, influence crushers are more suitable to approach granite, limestone, financial institution gravel and so on. inside the location of highway construction, water conservancy project and architecture.

It really is no denying that grinding procedure of ball mill has excellent importance in mineral method.Grinding operation is actually a continuation on the box packing machine as well as the important a part of preparation perform just before the selection.Grinding procedure is extensively utilized in mineral processing business,but in addition in building,chemical and electrical as well as other industrial sectors.Pretty much all mineral processing plants have grinding procedure except for the non-relevant plants.

Fote Brand is the China Famous Brand, and Fote believes that reliable and stable quality is the key to success. Our products like dolomite grinding millspiral classifier are well known at home and abroad. Welcome to visit for cooperation, thank you!spiral washer:http://www.fote-machine.com/product/classifier.html

Filed under Uncategorized by oppo

Permalink Print

Improve the Competitive Power of Iron Ore Stone Crushers

Marketing management is the Fote as fighting. Just as the ancient Chinese philosophical book The Art of War concludes, if you know yourself and your enemy, you’ll never lose a battle. Theory is just as reference, and practice is the best channel to communicat with all types of consumers, to learn bout all types of demands, and finally to come into successful deals.

If the equipment manufacturing industry upgrades, research-and-development-oriented enterprises will benefit. We think that the comparative advantage of the labor cost in China machinery industry is disappearing, so the upgrade of equipment manufacturing industry is the only way to success. At present the r&d investment is only that of about 2 percent for the 204 listed enterprises in our country machinery industry. But according to the fact that In America the R&D fees reach 6 percent for the 245 listed mechanical enterprises, the research and development investment of China machinery industry is insufficient.

Theory of 4C posted by American marketing specialist, Professor Lanteborn, in 1990, takes client’s demand as the guide and resets the four basic factors of marketing management: Consumer, Cost, Convenience and Communication. Fote puts consumer’s demand in the first place according to the Theory of 4C; and next decrease the purchasing cost for client; and then pays sufficient attention to onvenience when consumer make a purchase; at last, communicate efficiently around the client to reach the deal.

Theory of 4C takes consumer’s feelings seriously and takes market demand as the direction, which is easier to be accepted by the market. Crusher company shall take effort to use 4C. At frist, to value crusher consumer’s product experiences. Secondly, to consider client’s feelings. Don’t let client spend much time and cost in finding and purchasing. Thirdly, as to convenience, we think everyone knows how to do it. The last but not least is communication. To learn client’s demands on crusher collocation, application scale, consumption level and so on, and then to give consumer best suggestions.

The leading products of Fote Machinery includesymons cone crusher, manganese ore processing line, jaw crushing machine and so on. Moreover, we can provide program design, process flow design, standard and non-standard design for clients.rock crushing machine: http://www.ft-mac.com/pro/Stone_crusher.html

Filed under Uncategorized by oppo

Permalink Print